EZVIZ Camera Compatibility

QVR Pro, QVR Pro Client, QVR Center and Surveillance Station
Post Reply
rickorford
First post
Posts: 1
Joined: Fri Dec 14, 2018 7:59 pm

EZVIZ Camera Compatibility

Post by rickorford » Tue Apr 09, 2019 8:11 pm

Hi,
I have an EZVIZ C6TC camera.

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).

Thoughts?
-Rick
You do not have the required permissions to view the files attached to this post.

AlastairStevenson
Experience counts
Posts: 2216
Joined: Wed Jan 08, 2014 10:34 pm

Re: EZVIZ Camera Compatibility

Post by AlastairStevenson » Fri Apr 12, 2019 5:34 am

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).
A couple of things you could try -
Try other Hikvision models, and ignore the 'model name mismatch' diagnostic.
Also try connecting it as an ONVIF camera, if that model supports it.
TS-431+ as primary storage and media server and a bunch of IP cams under Surveillance Station.

tankalf
New here
Posts: 2
Joined: Fri May 27, 2011 1:49 am

Re: EZVIZ Camera Compatibility

Post by tankalf » Sun Jun 16, 2019 7:26 pm

Hi guys.
I have some EzViz surveillance camera: EzViz EzCube Pro (CS-CV206 model) and EzViz Ez360 (CS-CV246 model).
Before to buy a Qnap Nas to record their surveillance streams, I would like to understand if they are compatible with Qnap Surveillance Monitor system.
I want only to record 24/7 stream, without motion detection, I don't need this.
Can you please help me?

Thanks a lot.

neo799
First post
Posts: 1
Joined: Wed May 13, 2020 9:44 am

Re: EZVIZ Camera Compatibility

Post by neo799 » Wed May 13, 2020 6:14 pm

How did you get in the EZVIZ camera running in your Surveillance Station? I have the correct RSTP stream and I can see it when I play it in VLC media player but it won't show anything on the Qnap.

nikosan73
New here
Posts: 3
Joined: Mon Jun 08, 2020 8:57 pm

Re: EZVIZ Camera Compatibility

Post by nikosan73 » Mon Jun 08, 2020 9:57 pm

Similarly I cannot see the EZVIZ (DB1) via surveillance monitor. I can see via VLC. Any advice?

bblue967
New here
Posts: 3
Joined: Tue Jun 30, 2020 5:26 am

Re: EZVIZ Camera Compatibility

Post by bblue967 » Tue Jun 30, 2020 5:38 am

rickorford wrote:
Tue Apr 09, 2019 8:11 pm
Hi,
I have an EZVIZ C6TC camera.

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).

Thoughts?
-Rick
Hi,
please can you post all the config you are using, many thanks in advance.

Lu

spile
Getting the hang of things
Posts: 87
Joined: Tue May 24, 2016 12:13 am

Re: EZVIZ Camera Compatibility

Post by spile » Tue Jun 30, 2020 1:06 pm

Is it listed in the compatibility plugin pack? If not I would try a few different models that have the same spec as the one you are using. Assuming you are using QVR Pro.

bblue967
New here
Posts: 3
Joined: Tue Jun 30, 2020 5:26 am

Re: EZVIZ Camera Compatibility

Post by bblue967 » Thu Jul 02, 2020 5:40 am

bblue967 wrote:
Tue Jun 30, 2020 5:38 am
rickorford wrote:
Tue Apr 09, 2019 8:11 pm
Hi,
I have an EZVIZ C6TC camera.

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).

Thoughts?
-Rick
Hi,
please can you post all the config you are using, many thanks in advance.

Lu
I have problem to connect to the cam as I don't know what user and pass I have to use: I tryed with nas or network but always I have a message of error for incorrect user/pass, any glue, thanks
I had it working before, but I had to change something to the nas and now I don't remember what I used :evil: :evil:

bblue967
New here
Posts: 3
Joined: Tue Jun 30, 2020 5:26 am

Re: EZVIZ Camera Compatibility

Post by bblue967 » Sat Jul 04, 2020 5:19 am

bblue967 wrote:
Thu Jul 02, 2020 5:40 am
bblue967 wrote:
Tue Jun 30, 2020 5:38 am
rickorford wrote:
Tue Apr 09, 2019 8:11 pm
Hi,
I have an EZVIZ C6TC camera.

At the moment, I *can* get it to connect/record by using the "Generic camera" brand, and putting in RTSP/user/pass. Problem is, I cannot select alarm based recording (its grey'd out, see attached).

Thoughts?
-Rick
Hi,
please can you post all the config you are using, many thanks in advance.

Lu
I have problem to connect to the cam as I don't know what user and pass I have to use: I tryed with nas or network but always I have a message of error for incorrect user/pass, any glue, thanks
I had it working before, but I had to change something to the nas and now I don't remember what I used :evil: :evil:
Ok, I found it:

the password is the verification code of the camera
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Surveillance Solution”