Noob needs help with emby container

QNAP NAS solution for server virtualization and clustering/HA/FT
User avatar
Ask me anything
Posts: 5192
Joined: Sat Oct 01, 2011 7:50 am
Location: Minnesota

Re: Noob needs help with emby container

Post by Trexx » Wed Jan 22, 2020 12:33 am

See here, as I use there examples as my starting base.

Sent from my iPad using Tapatalk

Model: TS-877-1600 FW: 4.4.2.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x 500GB Evo 860
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666

Model:TVS-673 32GB FW: 4.4.2.x Test/Backup Box
Model:TS-228a FW: 4.4.2.x Test/Backup Box
NAS RAID Rebuild Times | Live QTS Videos | | QNAP NAS Guide | Information needed when you ask for HELP | QNAP Links, Tutorials, etc.
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq

New here
Posts: 9
Joined: Fri Jan 17, 2020 4:02 am

Re: Noob needs help with emby container

Post by mr.alien » Thu Jan 23, 2020 10:08 pm

thx for the link. ill check that out. still i wonder why my container station does not work. i would just like it to work properly. any suggestions in how i could get a solution for that somewhere here or else?

First post
Posts: 1
Joined: Sat Feb 08, 2020 4:26 pm

Re: Noob needs help with emby container

Post by bossakungen » Sat Feb 08, 2020 4:45 pm

I have the same problem, I have 2 NAS systems, one TS-431P2 and one TS-253A

I moved 2 disks from the 253 to the 431, added a new disk and then I added a new disk to the 253 and did a factory reset and wiped the disk.

If I create a new container on the wiped 253 there are shared folders that I can select (Container, Public, share).

On the 431 system, the shared folder option is empty as OP reported.

I don't see any differences in permissions and I logged in as admin and an admin-group user on both systems

Newly created shares does not show up either.

I'm guessing the move of existing disks did something to mess this up, but I cannot figure out how to fix it.

User avatar
Moogle Stiltzkin
Ask me anything
Posts: 8689
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....

Re: Noob needs help with emby container

Post by Moogle Stiltzkin » Wed May 20, 2020 7:28 am

using reverse proxy, ssl cert along with the emby container, might be a good idea, if you want to do remote access ... -with-emby
[Main Server] QNAP TS-877 w. 4tb [ 3x HGST Deskstar NAS (HDN724040ALE640) & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A w. 5x 2TB Samsung F3 (HD203WI) EXT4 Raid5
[Backup] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) single disks.
[^] QNAP TS-659 Pro II
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-228
[^] QNAP TS-128
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Asus AC68U Router|100dl/50ul MBPS FTTH Internet | Win10, WC PC-Intel i7 920 Ivy bridge desktop (1x 512gb Samsung 850 Pro SSD + 1x 4tb HGST Ultrastar 7K4000)

Guides & articles
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review

Post Reply

Return to “Server Virtualization & Clustering”