[ Domoticz ] [ 20.2.11995 ] lightweight Home Automation System

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by QNAP_Stephane » Sat May 09, 2020 6:08 pm

updated
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

Pico88
Starting out
Posts: 11
Joined: Thu Apr 28, 2016 12:06 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Pico88 » Sun May 10, 2020 3:26 pm

Thanks!

When I want to start new Domoticz I get the error "./domoticz: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory".

But if I roll back to the previous version, domoticz works fine.

User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by QNAP_Stephane » Sun May 10, 2020 5:49 pm

ok... foudn the issue

/lib/libm.so.6: version `GLIBC_2.27' not found (required by ./domoticz)

seems latest version ahs been compiled with a glibc 2.27... and Qnap x64 is only 2.21 :(

unless Qnap R&D update glibc version, it will need to rebuild the package and make it run under another ELF ...
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

Pico88
Starting out
Posts: 11
Joined: Thu Apr 28, 2016 12:06 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Pico88 » Sun May 10, 2020 9:27 pm

Ok. So we have to wait for qnap update :)

Thanks in advance.

orionn2o
New here
Posts: 2
Joined: Sun Oct 18, 2020 12:53 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by orionn2o » Sun Oct 18, 2020 1:09 am

I've been using Domoticz for years with no problems at all, however my NAS updated to latest QTS last night and now it wont start.

I firstly says that it has no digital signature, so i updated to latest version and get a bunch of failed output:
./Domoticz: /usr/lib/libcrypto.so.1.0.0: no version information available (required by ./Domoticz)
./Domoticz: /lib/libssl.so.1.0.0: no version information available (required by ./Domoticz)
./Domoticz: /lib/libssl.so.1.0.0: no version information available (required by ./Domoticz)
./Domoticz: /usr/lib/libldap_r-2.4.so.2: no version information available (required by /share/CACHEDEV1_DATA/.qpkg/domoticz/lib/libcurl-gnutls.so.4)
./Domoticz: /lib/liblber-2.4.so.2: no version information available (required by /share/CACHEDEV1_DATA/.qpkg/domoticz/lib/libcurl-gnutls.so.4)


Anyone else had this issue>?

Pico88
Starting out
Posts: 11
Joined: Thu Apr 28, 2016 12:06 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Pico88 » Mon Oct 19, 2020 12:49 am

I've got the same problem. After latest update to QTS 4.5.1 Domoticz doesn't work any more :(

WIP58
New here
Posts: 5
Joined: Mon Aug 03, 2015 1:53 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by WIP58 » Sun Oct 25, 2020 4:28 am

Same here. Accessing Domoticz from QNAP it reports "offline" :(

Franky69
Starting out
Posts: 11
Joined: Tue Oct 27, 2020 5:04 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Franky69 » Tue Oct 27, 2020 5:08 am

Sine tonight I have the same problem. Really annoying.
I am quite new to the Qnap ecosystem, but is this something which Qnap should fix or the developer who ported Domoticz to the Qnap platform?

msloo
New here
Posts: 2
Joined: Sun Apr 16, 2017 4:26 pm

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by msloo » Tue Oct 27, 2020 11:58 pm

Same problem here. I made a ticket for the QNAP helpdesk. When I reinstall the former firmware Domoticz works flawlessly...

Franky69
Starting out
Posts: 11
Joined: Tue Oct 27, 2020 5:04 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Franky69 » Wed Oct 28, 2020 4:01 am

I also downgraded to an older QTS version. Domoticz is working again now.
I did get a lot of error messages about Mediacenter not being able to create miniatures...

Franky69
Starting out
Posts: 11
Joined: Tue Oct 27, 2020 5:04 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Franky69 » Wed Oct 28, 2020 4:13 am

Can anyone tell me what the latest QTS version is where Domoticz is working?
I downgraded to version 4.4.3.1439 but there were some newer versions as well.

Witte667
First post
Posts: 1
Joined: Sun Nov 29, 2015 11:00 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Witte667 » Wed Oct 28, 2020 8:09 pm

Yep, same problem here. After update to 4.5.1 error ./domoticz: error while loading shared libraries: libudev.so.1: cannot open shared object file: No such file or directory.
Hope we get an update soon...

Franky69
Starting out
Posts: 11
Joined: Tue Oct 27, 2020 5:04 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Franky69 » Wed Oct 28, 2020 8:46 pm

Anyone using a newer Domoticz version than my 4.10717 ?

msloo
New here
Posts: 2
Joined: Sun Apr 16, 2017 4:26 pm

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by msloo » Thu Oct 29, 2020 3:38 am

msloo wrote:
Tue Oct 27, 2020 11:58 pm
Same problem here. I made a ticket for the QNAP helpdesk. When I reinstall the former firmware Domoticz works flawlessly...
Update: I contacted QNAP helpdesk. They are not willing to help. Argue that it is a third party problem, not theirs. I disagree, it is their firmware upgrade...
Well, I'm going to downgrade now and will replace my NAS by Synology. This kind of problem I never experienced there

Franky69
Starting out
Posts: 11
Joined: Tue Oct 27, 2020 5:04 am

Re: [ Domoticz ] [ 4.11995.0 ] lightweight Home Automation System

Post by Franky69 » Thu Oct 29, 2020 4:10 am

That really **! So it should be fixed by the person who ported Domoticz to Qnap?

Post Reply

Return to “Community Apps”