[ Domoticz ] [ 20.2.11995 ] lightweight Home Automation System

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
oerli
New here
Posts: 6
Joined: Mon Nov 23, 2009 12:38 am

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by oerli » Mon Dec 04, 2017 3:30 am

I made the hgi driver for my ts-669, which should also work on other ts-xx9 devices. The module is attached, put it somewhere on your persistent storage (under /etc/config is good) and load it with insmod using autostart.sh (otherwise it will not be loaded after reboot). I used the latest GPL kernel for my model, uname -a should give version 3.4.6 for this module to work.

Module is loaded ok, but not paired with HGI80. I am still investigated this, but it is a tough one. It should auto-register on ttyUSB1. tbc.
You do not have the required permissions to view the files attached to this post.

oerli
New here
Posts: 6
Joined: Mon Nov 23, 2009 12:38 am

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by oerli » Mon Dec 04, 2017 3:38 am

Device is listed with lsusb:

Code: Select all

Bus 009 Device 003: ID 10ac:0102 Honeywell, Inc.


After insmod /etc/config/ti_usb_3410_5052.ko from dmsg:

Code: Select all

[ 7511.916137] usbcore: registered new interface driver ti_usb_3410_5052
[ 7511.916225] USB Serial support registered for TI USB 3410 1 port adapter
[ 7511.916304] USB Serial support registered for TI USB 5052 2 port adapter
[ 7511.916329] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver


lsmod:

Code: Select all

ti_usb_3410_5052 21446 0 - Live 0xffffffffa0079000


But device is not attached to module

Silverow
New here
Posts: 5
Joined: Tue Nov 28, 2017 12:39 pm

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by Silverow » Mon Dec 04, 2017 4:07 pm

QNAP_Stephane, please update domoticz and z-wave


Silverow
New here
Posts: 5
Joined: Tue Nov 28, 2017 12:39 pm

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by Silverow » Wed Dec 27, 2017 9:46 pm

Any chance to see Domoticz update him self by "update" button?

User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by QNAP_Stephane » Thu Dec 28, 2017 12:38 am

Silverow wrote:Any chance to see Domoticz update him self by "update" button?


no chance.. you dont have compiler embedded on your NAS
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

DeVisdude
New here
Posts: 2
Joined: Mon Oct 10, 2016 1:16 am

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by DeVisdude » Tue Jun 12, 2018 1:43 am

Am I correct that the timer function isn't working in 3.8314?

Pico88
Starting out
Posts: 11
Joined: Thu Apr 28, 2016 12:06 am

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by Pico88 » Sat Jul 07, 2018 12:59 am

Any chance to upgrade to the latest stable version?

User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

Re: [ Domoticz ] [ 3.8314 ] lightweight Home Automation System

Post by QNAP_Stephane » Mon Jul 09, 2018 8:10 pm

it is already on Qnapclub repo.. forgot update the thread here
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

Pico88
Starting out
Posts: 11
Joined: Thu Apr 28, 2016 12:06 am

Re: [ Domoticz ] [ 4.9701.0 ] lightweight Home Automation System

Post by Pico88 » Tue Jul 10, 2018 10:37 pm

Ok. No problem. Thanks!

mjaqb
New here
Posts: 2
Joined: Wed Jul 19, 2017 8:45 pm

Re: [ Domoticz ] [ 4.9701.0 ] lightweight Home Automation System

Post by mjaqb » Sun Jul 22, 2018 7:14 pm

Hi,

big thanks for update! I have some problem - I have installed new version "on" the old. Everything's looks fine - there is still my switches etc., but after update domoticz didn't connect with my z-wave stick and doesn't work at all. What can I check? Previous version works without any problem...

"lsusb" shows:
Bus 001 Device 003: ID 0658:0200 Sigma Designs, Inc.
so it's ok also "ls /dev/ttyACM*" shows
/dev/ttyACM0

but Config->Hardware page there is "Version: ?Manager Down!" status of z-wave stick. Any suggestions?

El3ctr0
First post
Posts: 1
Joined: Mon Nov 05, 2018 5:20 pm

Re: [ Domoticz ] [ 4.9701.0 ] lightweight Home Automation System

Post by El3ctr0 » Mon Nov 05, 2018 5:24 pm

Hello,
I have tried to install domoticz on ts-231p. I did it through app center. It looked all right, however even if domoticz shows in app center that it is running, once I click on it, the webpage can not connect to it. I did try to check what services are on through SSH and it seems that domoticz is not running (in background).

I did try to run ./Domoticz, but it says that can't find a file named Domoticz (within the folder with scripts). Any suggestions how could I reinstal? Is my qnap missing any packages that I should add?

jasiek5603
First post
Posts: 1
Joined: Thu Aug 03, 2017 4:47 am

Re: [ Domoticz ] [ 4.9701.0 ] lightweight Home Automation System

Post by jasiek5603 » Tue Nov 20, 2018 10:55 pm

Hi,

I have the same problem as El3ctr0 on my QNAP TS-231. After installing the package Domoticz does'nt start on port 8855 and after trying to run the ./domoticz.sh script I receive a message as below:
./Domoticz: No such file or directory
I can see that such a file exists (ls) and when I try to run it with the ./Domoticz command, I get the same answer:
./Domoticz: No such file or directory
Can you help us?

micronikje
First post
Posts: 1
Joined: Fri Jan 04, 2019 10:04 pm

Re: [ Domoticz ] [ 4.9701.0 ] lightweight Home Automation System

Post by micronikje » Fri Jan 04, 2019 10:09 pm

Hi,

I have installed domoticz 4.9701.0 on my ts-453a and it seems to work fine.
But i found a homewizard plugin for a synology nas. Is there also a plugin for qnap? And if so how can i install it?

Does anyone know?

Pico88
Starting out
Posts: 11
Joined: Thu Apr 28, 2016 12:06 am

Re: [ Domoticz ] [ 4.9701.0 ] lightweight Home Automation System

Post by Pico88 » Sat May 09, 2020 2:35 am

Hi!

Is there a chance to update to the latest stable version?

Post Reply

Return to “Community Apps”