[ Home Assistant ] [ 0.109.6 ] Open-source home automation platform

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
lowfi
Know my way around
Posts: 112
Joined: Fri Oct 16, 2015 10:49 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by lowfi » Tue Aug 08, 2017 5:39 pm


Kurisutian
Starting out
Posts: 20
Joined: Sun Feb 25, 2018 3:05 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Kurisutian » Sun Feb 25, 2018 3:25 pm

Any news on a possible update?
I'd love to fully run Home-Assist outside container station but currently when installing it, it shows the following error:

Code: Select all

Invalid Config 

The following components and platforms could not be set up:

- discovery
- cloud

Please check your config


So for I'm fairly new to my QNAP system as well as to Home-Assistant so I am stuck at all attempts to fix this. Has anyone else the same problem and was able to fix it? Thanks!
---
QNAP TVS-873-8G

Cadster
Starting out
Posts: 32
Joined: Fri Jul 17, 2009 3:52 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Cadster » Sun Feb 25, 2018 4:08 pm

I had the same problem with the discovery module in ha.
It uses the same port (3000) as the NFS-service, after i switched it off ( in controlpanel -> network & file services) my problem with discovery was gone.
TS-253A 8Gb

Kurisutian
Starting out
Posts: 20
Joined: Sun Feb 25, 2018 3:05 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Kurisutian » Mon Feb 26, 2018 4:51 am

Thanks for that hint. I just checked it out but it didn't work. I had NFS disabled (although I need it for my current setup) and restarted Home-Assistant but still the same errors occur. Any other ideas? ;)
---
QNAP TVS-873-8G

Cadster
Starting out
Posts: 32
Joined: Fri Jul 17, 2009 3:52 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Cadster » Mon Feb 26, 2018 7:25 am

i installed the qpkg and not the docker to be clear.
after that i did a reinstall of netdisco.

Code: Select all

cd /share/CACHEDEV1_DATA/.qpkg/Home-Assistant/bin
./pip3 install netdisco -I
TS-253A 8Gb

Kurisutian
Starting out
Posts: 20
Joined: Sun Feb 25, 2018 3:05 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Kurisutian » Mon Feb 26, 2018 11:27 pm

Well, running the command indicates that gcc is unavailable. Do I have to install this as well? Should it be a dependancy for the home-assistant package? I presumed the package was complete so I do not need to install other dependancies manually.

Here is the error I'm getting:

Code: Select all

    gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -O2 -fPIC -I/opt/Home-Assistant/include -I/opt/Home-Assistant/include/ncurses -fPIC -DNETIFACES_VERSION=0.10.6 -I/opt/Home-Assistant/include/python3.6m -c netifaces.c -o build/temp.linux-x86_64-3.6/netifaces.o
    unable to execute 'gcc': No such file or directory
    error: command 'gcc' failed with exit status 1


I wanted to keep things as small as possible that's why I'm asking. I didn't want to add all kind of dev-tools to the NAS. :wink:
---
QNAP TVS-873-8G

Cadster
Starting out
Posts: 32
Joined: Fri Jul 17, 2009 3:52 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Cadster » Tue Feb 27, 2018 2:14 am

As Stephane states in the first post netdisco (0.5.5) and netifaces (0.10.4) are included so there should'nt be a need to compile it yourself.
TS-253A 8Gb

Kurisutian
Starting out
Posts: 20
Joined: Sun Feb 25, 2018 3:05 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Kurisutian » Tue Feb 27, 2018 2:26 am

Well, than there must be something else wrong with the package since the error remains and the two extensions (discovery and cloud) are still not available. :?:
---
QNAP TVS-873-8G

User avatar
Trexx
Ask me anything
Posts: 5304
Joined: Sat Oct 01, 2011 7:50 am
Location: Minnesota

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Trexx » Tue Apr 10, 2018 10:53 pm

Any chance Stephane of getting this updated to 0.66 release?
Paul

Model: TS-877-1600 FW: 4.4.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x 500GB Evo 860
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
GPU: EVGA GTX 1060 6GB
UPS: CP AVR1350

Model:TVS-673 32GB FW: 4.4.3.x Test/Backup Box
Model:TS-228a FW: 4.4.3.x Test/Backup Box
-----------------------------------------------------------------------------------------------------------------------------------------
NAS RAID Rebuild Times | Live QTS Videos | | QNAP NAS Guide | Information needed when you ask for HELP | QNAP Links, Tutorials, etc.
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq

User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by QNAP_Stephane » Thu Apr 12, 2018 2:57 pm

I will put it in my large todo list :))
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

User avatar
Trexx
Ask me anything
Posts: 5304
Joined: Sat Oct 01, 2011 7:50 am
Location: Minnesota

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Trexx » Thu Apr 12, 2018 11:18 pm

Understand... a lot of updates to community apps lately. Still waiting on Alfresco update too :) <nudge>
Paul

Model: TS-877-1600 FW: 4.4.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x 500GB Evo 860
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
GPU: EVGA GTX 1060 6GB
UPS: CP AVR1350

Model:TVS-673 32GB FW: 4.4.3.x Test/Backup Box
Model:TS-228a FW: 4.4.3.x Test/Backup Box
-----------------------------------------------------------------------------------------------------------------------------------------
NAS RAID Rebuild Times | Live QTS Videos | | QNAP NAS Guide | Information needed when you ask for HELP | QNAP Links, Tutorials, etc.
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq

fetjp
Starting out
Posts: 14
Joined: Sun Feb 19, 2017 11:28 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by fetjp » Tue May 08, 2018 6:33 am

I would also be interested on an updated version of Home Assistant.

User avatar
oyvindo
Experience counts
Posts: 1153
Joined: Tue May 19, 2009 2:08 am
Location: Norway, Oslo

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by oyvindo » Tue May 08, 2018 2:03 pm

This is an excellent contribution Stephane! :-)
Hopefully we can have this as a live and kicking forum thread for exchange of valuable tips and tricks on how to exploit HA. Even though I'll continue to run HA in docker (CS), and I recommend that over a stand-alone QPKG, issues and advises should still be valid on both platforms.
It is well known that HA is among the most versatile Home automation platforms around, but it's also a fact that it can be quite intimidating for beginners with little or no scripting experience. The component library is extensive, but documentation is often scarce and typically assumes that the reader knows everything before he/she starts experimenting.
As for myself, I'm baffled over the fact that no component exist that can produce a simple push-button icon. All I've been able to find are on/off sliders. Perhaps someone has a simple solution for that that doesn't require customization involving both HTML, Yaml and JSON scripting to get it running?
ImageImageImageImage

Stalksy
Starting out
Posts: 14
Joined: Sat Jun 18, 2011 7:57 pm

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Stalksy » Wed May 09, 2018 10:52 pm

Can this version of Home Automation support Tuya lamps?

I think this is one:
https://github.com/clach04/python-tuya

User avatar
Skeptical.me
Easy as a breeze
Posts: 405
Joined: Sun Jun 05, 2016 8:58 am
Location: Australia

Re: [ Home Assistant ] [ 0.36.1 ] Open-source home automation platform

Post by Skeptical.me » Thu May 31, 2018 1:51 am

Hi,

I haven't used terminal ssh on the qnap for awhile, however, the path to the ,yaml directory is

Home Assistant
0.69.1

Path to configuration.yaml: /share/CE_CACHEDEV1_DATA/.qpkg/Home-Assistant/CONFIG_DIR

But I can't remember how to edit the configuration.yaml, whats the command?
QNAP TS-253Be 2 x WD Red 6TB RAID1, & 1 x WD Ext. 6TB, QTS: 4.4.1

QVPN, Plex, Radar, Sonarr, Lidarr, NZBGet, NZBHydra 2


ASUS RT-AX88U ASUSWRT-Merlin, Apple iMac 27" 5K 32GB 500GB SSD i5 3.5Ghz. Dell WIN 10 Laptop

Post Reply

Return to “Community Apps”