[ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

[ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by QNAP_Stephane » Sun Sep 22, 2019 6:40 pm

Source : kernel.org

Download :

https://www.qnapclub.eu/fr/qpkg/803

Drivers list automated installed with this qpkg

Code: Select all

aircable.ko
ark3116.ko
belkin_sa.ko
ch341.ko
cp210x.ko
cyberjack.ko
cypress_m8.ko
digi_acceleport.ko
empeg.ko
f81232.ko
f81534.ko
ftdi_sio.ko
garmin_gps.ko
io_edgeport.ko
io_ti.ko
ipaq.ko
ipw.ko (compiled but not insalled)
ir-usb.ko
iuu_phoenix.ko
keyspan.ko (compiled but not insalled)
keyspan_pda.ko (compiled but not insalled)
kl5kusb105.ko
kobil_sct.ko
mct_u232.ko
metro-usb.ko
mos7720.ko
mos7840.ko
mxuport.ko
navman.ko
omninet.ko
opticon.ko
option.ko (compiled but not insalled)
oti6858.ko
pl2303.ko
qcaux.ko
qcserial.ko (compiled but not insalled)
quatech2.ko
safe_serial.ko
sierra.ko
spcp8x5.ko
ssu100.ko
symbolserial.ko
ti_usb_3410_5052.ko
upd78f0730.ko
usb_debug.ko
usbserial.ko
usb-serial-simple.ko
usb_wwan.ko
visor.ko
whiteheat.ko (compiled but not insalled)
wishbone-serial.ko
xsens_mt.ko
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

ruben0909
New here
Posts: 4
Joined: Sun Nov 01, 2015 6:14 am

Re: [ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by ruben0909 » Sat Mar 07, 2020 8:58 pm

Hi
I'm not tested yet but thank you for this.
Could I ask you how to build these drivers ? The Kernel for 4.4.1 is not published byQNAP right?

Thank you again

User avatar
QNAP_Stephane
Experience counts
Posts: 3867
Joined: Wed Mar 27, 2013 1:00 am

Re: [ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by QNAP_Stephane » Mon Mar 09, 2020 6:05 pm

GPL with Kernel source tree is available here :

https://sourceforge.net/projects/qosgpl/
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

User avatar
peelos
Been there, done that
Posts: 511
Joined: Sun Jun 26, 2016 9:28 pm

Re: [ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by peelos » Mon Mar 16, 2020 5:58 pm

Showing my ignorance here - do these enable users to connect USB devices and have them recognized by the kernel?

Is there an example of a use case anyone can share?
NAS: TVS-1282-i7K-40G / 4 x 500GB SSD 2.5" / 2 x 500GB M.2 SSD / 8 x 12TB WD Whites 3.5" / Corsair H5-SF Watercooling / 3 x 80mm PWM Noctua fans / Corsair 600W PSU / Asus Turbo GTX 1060 6GB GPU
Software: Plex Media Server / QTransmission / Sonarr / Radarr / Jackett / QMono / Tautulli / OpenHAB / Resilio Sync / QPython / QJDK 8 / NetData / Qapache / SortMyQPKGs
pfSense Firewall / OpenVPN Server: QOTOM Fanless Mini PC / Core i5 / 8GB RAM / 128GB SSD / 4 Gigabit NICs / AES-NI
Wireless Routers: 2 x Netgear AC1900 R7000 Nighthawk / Advanced Tomato Firmware

User avatar
philippe.mande
Getting the hang of things
Posts: 76
Joined: Sun Dec 23, 2018 6:15 pm
Location: Saint-Mandé France
Contact:

Re: [ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by philippe.mande » Tue Mar 17, 2020 1:37 am

Hi,

Some USB stick for Home Automation or Domoticz or ... require a specific USB serial kernel module to create the USBtty require to connect to the application
Some specific connection like with 3D printer & octoprint require missing kernel modules
etc. etc.

If you read documentation for this applications, you can load only the requested driver,if provider do the job as usual you can used depmod / modinfo & modprobe to have less work to load the depends ... (Linux do it for you automatically)
This kernel modules "just" :roll: add a device to the device tree of kernel when connected ... just take care if you have to add options to module load ... not complicated but require a minimum of Linux skills.
dmesg command (list console messages) help you to identify USBtty or other name created and if no error occurs when connecting your piece of hardware ...

I used my own modules (so not this QNAP's delivery) but it's the same ... and also on other NAS Brand (Asustor, Syno, etc.)

Philippe.
New pseudo for Father_Mande (now closed) ...
QNAP TS-x53 Pro, TVS-x73, TS-x31+, TS-x28A DEAD ... and some oldest under Debian ... etc.
Asustor AS5002T ; AS1002T ... etc.

User avatar
peelos
Been there, done that
Posts: 511
Joined: Sun Jun 26, 2016 9:28 pm

Re: [ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by peelos » Tue Mar 17, 2020 5:31 pm

Many thanks for your detailed explanation Philippe - so it is actually somehow as imagined..

Loading USB drivers for a Z-Wave stick so that OpenHAB can use it on "/dev/ttyACM0" by using command "insmod /usr/local/modules/cdc-acm.ko" is an example then..

Time to do some more reading based on this!
NAS: TVS-1282-i7K-40G / 4 x 500GB SSD 2.5" / 2 x 500GB M.2 SSD / 8 x 12TB WD Whites 3.5" / Corsair H5-SF Watercooling / 3 x 80mm PWM Noctua fans / Corsair 600W PSU / Asus Turbo GTX 1060 6GB GPU
Software: Plex Media Server / QTransmission / Sonarr / Radarr / Jackett / QMono / Tautulli / OpenHAB / Resilio Sync / QPython / QJDK 8 / NetData / Qapache / SortMyQPKGs
pfSense Firewall / OpenVPN Server: QOTOM Fanless Mini PC / Core i5 / 8GB RAM / 128GB SSD / 4 Gigabit NICs / AES-NI
Wireless Routers: 2 x Netgear AC1900 R7000 Nighthawk / Advanced Tomato Firmware

johnnyletrois
New here
Posts: 5
Joined: Tue Feb 21, 2017 3:17 am

Re: [ USB Serial Drivers ] [ 4.4.1 ] Add some missing USB Serial Drivers compiled from GPL Source Kernel 4.14

Post by johnnyletrois » Tue Oct 20, 2020 2:06 am

Sticks at 75% when adding via the GUI. Would love to get the ch341.ko for my new Zigbee adapter.

Running a TVS-682 on firmware 4.5.1.1456.

Post Reply

Return to “Community Apps”