ST6000VN0033

Discuss and share your Seagate drive experience
Post Reply
LosLagos
New here
Posts: 2
Joined: Wed Aug 12, 2020 1:24 am

ST6000VN0033

Post by LosLagos » Wed Aug 12, 2020 1:36 am

In a TS-419P II with a RAID 5 1 Disk crash and I´m trying to replace it with a IronWolf 6TB ST6000VN0033 the light is green BUT in SMART i got Disk does not exist.
The disk is in the compatibility list
In some moment I got this in the Log: [Harddisk 1] I/O error, sense_key=0xb, asc=0x0, ascq=0x0, CDB=28 00 00 00 00 00 00 00 02 00 and the disk led indocator goes to red.
Any help is welcome

User avatar
dolbyman
Guru
Posts: 20545
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: ST6000VN0033

Post by dolbyman » Wed Aug 12, 2020 1:43 am

I guess the old disk was not 6TB ?(as it would hit the 16TB volume ceiling on your device)

could be a DOA drive .. can you test it in a PC or SATA dock ?

what does

Code: Select all

cat /proc/mdstat 
via ssh say ?

LosLagos
New here
Posts: 2
Joined: Wed Aug 12, 2020 1:24 am

Re: ST6000VN0033

Post by LosLagos » Wed Aug 12, 2020 8:50 am

Thanks for your answer,
My QNAP was with 4 2TB Disks WD in RAID 5.
I'm new and try to test the disk but only have windows and with a external usb dock I can´'t see the disk.

Personalities : [raid1] [linear] [raid0] [raid10] [raid6] [raid5] [raid4]
md0 : active raid5 sdb3[1] sdd3[3] sdc3[2]
5855836800 blocks level 5, 64k chunk, algorithm 2 [4/3] [_UUU]

md4 : active raid1 sdd2[3](S) sdc2[2] sdb2[0]
530128 blocks super 1.0 [2/2] [UU]

md13 : active raid1 sdc4[0] sdd4[2] sdb4[1]
458880 blocks [4/3] [UUU_]
bitmap: 49/57 pages [196KB], 4KB chunk

md9 : active raid1 sdc1[0] sdd1[2] sdb1[1]
530048 blocks [4/3] [UUU_]
bitmap: 65/65 pages [260KB], 4KB chunk

unused devices: <none>

Ron1963
Easy as a breeze
Posts: 464
Joined: Wed Apr 28, 2010 9:22 pm

Re: ST6000VN0033

Post by Ron1963 » Wed Aug 12, 2020 5:38 pm

Download and install Seatools for Windows, see https://www.seagate.com/support/downloa ... in-master/ If that program doesn't see the drive, it's without question DOA. If it does see the drive, run the long test. You probably need the outcome of that test anyway if you need to return.
1x TS431, 1x TS251, 1x TS253

Post Reply

Return to “Seagate Drive Discussion”