VPN Client virtual switch set up

Don't miss a thing. Post your questions and discussion about other uncategorized NAS features here.
Post Reply
shamz84
Starting out
Posts: 18
Joined: Wed Nov 28, 2012 7:42 pm

VPN Client virtual switch set up

Post by shamz84 » Thu Aug 13, 2020 8:57 am

[wiki][/wiki]Hey guys....I recently bought my self a new QNap and looking to configure it.

What I'd like to do is run a VPN client on the QNap and route certain traffic through that.

So When setting up the VPN client...it's doesn't seem i can use it for only one network adapter...it's had to be used via the default gateway...I'm guessing that means all my traffic with go through this?

Is that correct or am I missing something?

Also I was looking at the virtual switch...so what I wanted to do is

Have the VPN attached the network adapter 2. Then my chosen container will go there the VPN...bit couldn't figure out how that is achievable


Thanks for your help.

RichJacot
Starting out
Posts: 24
Joined: Fri Apr 24, 2020 9:16 pm

Re: VPN Client virtual switch set up

Post by RichJacot » Sat Aug 15, 2020 4:04 am

I'd be interested in this also. Subscribed.
TVS-672N - 32GB - 4.4.2.1270 - Static volume - RAID5 - 5 x 4TB -- RW Cache - RAID1 - 2 x 500GB M.2 SSD
TS-453B - 16GB - 4.4.2.1270 - Static volume - RAID5 - 4 x 3TB

sszben
First post
Posts: 1
Joined: Mon Jan 11, 2016 4:48 am

Re: VPN Client virtual switch set up

Post by sszben » Thu Sep 03, 2020 6:33 pm

I would be interested too!
I would like to use adapter2 to share the VPN connection with other devices via cable.

Post Reply

Return to “Miscellaneous”