Firmware 4.2.2 build 20161021 prevent disk from hibernate

Discussion about hard drive spin down (standby) feature of NAS.
ElectronKing
First post
Posts: 1
Joined: Wed Oct 19, 2016 4:06 am

Re: Firmware 4.2.2 build 20161021 prevent disk from hibernate

Post by ElectronKing » Sat Dec 10, 2016 3:33 am

I detected this issue back in October (before this tread was even started) and was working with a Qnap tech trying to demonstrate they had an issue with the latest [then subsequent] firmware. After he was finally convinced, he said he would escalate the issue to the firmware guys.

He contacted me today stating the issue has been resolved as of the newest release of the firmware (4.2.2 1208). Haven't tested it myself yet but intend to do that ASAP. Just wanted to let you guys know.

Thanks to Andy at Qnap tech support for following this through and hopefully coming to a resolution.

Cheers!

manny2003
Getting the hang of things
Posts: 74
Joined: Sun Feb 15, 2015 8:57 am

Re: Firmware 4.2.2 build 20161021 prevent disk from hibernate

Post by manny2003 » Sat Dec 10, 2016 10:12 am

ElectronKing wrote:I detected this issue back in October (before this tread was even started) and was working with a Qnap tech trying to demonstrate they had an issue with the latest [then subsequent] firmware. After he was finally convinced, he said he would escalate the issue to the firmware guys.

He contacted me today stating the issue has been resolved as of the newest release of the firmware (4.2.2 1208). Haven't tested it myself yet but intend to do that ASAP. Just wanted to let you guys know.

Thanks to Andy at Qnap tech support for following this through and hopefully coming to a resolution.

Cheers!


Thanks ElectronKing to inform us. I will then wait for this new release to come out finger crossed. :D
Qnap NAS: HS-251 OS Ver. 4.2.2 20160901 | HD: 2x WD40EFRX | RAID: 1 | Used OS: Windows 10 x64
Qnap NAS: TS-251-4GB OS Ver. 4.2.2 20160901 | HD: 1x WD40EFRX | RAID: 0 | Used OS: Windows 10 x64

Ron1963
Easy as a breeze
Posts: 449
Joined: Wed Apr 28, 2010 9:22 pm

Re: Firmware 4.2.2 build 20161021 prevent disk from hibernate

Post by Ron1963 » Sat Dec 10, 2016 8:00 pm

Well, it's out.
1x TS431, 1x TS251, 1x TS253

jjaannrr
First post
Posts: 1
Joined: Thu Jan 28, 2016 8:41 pm

Re: Firmware 4.2.2 build 20161021 prevent disk from hibernate

Post by jjaannrr » Wed Dec 14, 2016 5:49 am

I'm happy to say that QTS 4.2.2 Build 20161208 fixed the issue for me (with TS-451+)

User avatar
Toxic17
Ask me anything
Posts: 5432
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: Firmware 4.2.2 build 20161021 prevent disk from hibernate

Post by Toxic17 » Wed Dec 14, 2016 7:48 am

I see QNAP have updated their FAQ's on Why the hard drive of NAS does not go to standby mode?
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.2.1354 • TVS-463-16GB 4.4.2.1354 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.1161 • APC Back-UPS ES 700G •
QPKG's: Plex 1.19.3 • Apache73 v2443.74070 • QSonarr 3.0.3.809 • QNBZGet 21.0 • phpMyAdmin 5.0.2 • Qmono 6.80.105 • McAfee 3.1.0 -6010 • HBS 3.0.200424 • LEgo v3.6.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+ • UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

Post Reply

Return to “HDD Spin Down (HDD Standby)”